某公司的网络拓扑如图4-1所示,随着业务的发展,接待区wifi的接入设备过多,导

最全题库2022-08-02  51

问题 某公司的网络拓扑如图4-1所示,随着业务的发展,接待区wifi的接入设备过多,导致掉线不稳定。网络管理员提出进行改造,设计如图2的接待区所示。问题1(13分)以下AC与S2交换机的部分配置,请补充完整。要求AC与AP之间的vlan信息如下表所示。配置S2[Switch] sysname (1)[S2]vlan batch (2)[S2]interface GigabitEthernet0/0/1[S2-GigabitEthernet0/0/1]port link-type (3)[S2-GigabitEthernet0/0/1]port trunk(4) //设置默认vlan id 为100 [S2-GigabitEthernet0/0/1]port trunk (5) vlan 100 101 102 103[S2-GigabitEthernet0/0/1]quit[S2]interface GigabitEthernet0/0/2[S2-GigabitEthernet0/0/2]port link-typetrunk[S2-GigabitEthernet0/0/2]port trunkallow-pass vlan 100 101 102 103[S2-GigabitEthernet0/0/2]quit…[AC]vlan batch 100 101 102 103[AC](6)[AC-GigabitEthernet0/0/1]port link-typetrunk[AC-GigabitEthernet0/0/1]port trunkallow-pass(7)[AC-GigabitEthernet0/0/1]quit[AC]dhcp (8)[AC]interface (9)[AC -Vlanif100]ip address (10)[AC -Vlanif100]dhcp select (11)[AC-Vlanif100]quit[AC]interface vlanif 101[AC -Vlanif101]ip address (12)[AC -Vlanif101]dhcp select interface[ACVlanif101](13)[AC]…

选项

答案

解析 (1)sysname S2 (2)vlan 100 to 103 或者 vlan 100 101 102 103(3)trunk(4)pvid vlan 100(5)allow-pass (6)interface GigabitEthernet0/0/1(7)vlan 100 to 103 或者 vlan 100 101 102 103(8)enable(9) Vlanif 100 (10)192.168.100.1 24 (11) interface  (12) 192.168.101.1 24 (13) quit
【解析】


[Switch] sysname S2
转载请注明原文地址:https://tihaiku.com/congyezige/2403376.html

最新回复(0)