首页
登录
职称英语
How many are there quality control inspection points? [br] [originaltext]Part F
How many are there quality control inspection points? [br] [originaltext]Part F
游客
2025-05-16
7
管理
问题
How many are there quality control inspection points? [br]
Part Four. Questions 23 to 30.
You will hear a conversation about quality control.
For each question 23-30 , mark one letter (A, B or C) for the correct answer.
After you have listened once , replay the recording.
You now have 45 seconds to read through the questions.
[pause]
Now listen , mark A , B, or C.
M: Could you tell me a bit about quality control at the factory?
W: Well, there are four main quality control inspection points. We begin by visiting our suppliers to make sure we are happy with their quality control. Next, we inspect all goods on arrival at our factory and the third inspection point is during production. And the last stage is chemical analysis of our finished goods.
M: And what do you look for at each of the four inspection points?
W: Well each stage is different. With our suppliers, for instance, we inspect their quality control processes and, even more importantly, their factory hygiene. If we’re not happy with their hygiene, we’ll cancel the supply contract. As the goods is in stage, we make sure that order quantities are correct and the quality is OK. We also check the transport packaging. If the packing is damaged, the warehouse shelf-life can be reduced.
M: And what quality checks do you run during production?
W: We take samples to check there isn’t too much cooking oil on the snack and that each snack has the minimum amount of flavouring. We also check the size of the snacks and their crispness. If the snacks are too oily, they go soft.
M: So that leaves the finished goods. What do you check for at the final quality control stage?
W: We check individual bags to make sure that the packet weight is above the acceptable minimum and that the packet is sealed properly. We also check the taste.
M: And how do you do that?
W: Well, we eat them. How else? We also do chemical analysis to check things like fat levels and other information that we have to put on the packets.
[pause]
Now listen to the recording again.
[pause]
That is the end of Part Four. You now have ten minutes to transfer your answers to your Answer Sheet.
[pause]
选项
A、Check weight.
B、Check package.
C、Check weight, package and taste.
答案
C
解析
文中提到重量、包装、味道均要检验。故选C。
转载请注明原文地址:https://tihaiku.com/zcyy/4078363.html
相关试题推荐
Howmanyaretherequalitycontrolinspectionpoints?[br][originaltext]PartF
Howmanyaretherequalitycontrolinspectionpoints?[br][originaltext]PartF
Howmanyaretherequalitycontrolinspectionpoints?[br][originaltext]PartF
Howmanyaretherequalitycontrolinspectionpoints?[br][originaltext]PartF
Whatistheman’stitle?[br][originaltext]PartOne.Questions1to8.Forque
Whatistheman’stitle?[br][originaltext]PartOne.Questions1to8.Forque
Whatistheman’stitle?[br][originaltext]PartOne.Questions1to8.Forque
Whatistheman’stitle?[br][originaltext]PartOne.Questions1to8.Forque
Themeetingisbeingheldtodiscuss______.[br][originaltext]NFC=NationalF
Themeetingisbeingheldtodiscuss______.[br][originaltext]NFC=NationalF
随机试题
WhatdoesAlansayabestboyis?[originaltext]W:Isupposethefirstquestion
[originaltext]Longbeforetheycanactuallyspeak,babiespayspecialatten
曲线y=x2+3x+4在点(-1,2)处的切线方程为______.
试述早期妊娠的辅助诊断方法。
能缩短格林-巴利综合征患儿病程,改善预后的治疗方法是A.静脉注射大剂量抗生素
一般均衡分析方法的代表人物是( )。A.亚当·斯密 B.希克斯 C.马歇尔
下列有关宋朝法律制度的表述,正确的是( )。 A.《宋刑统》是中国历史上第一
在我国,交割仓库不得有的行为包括( )。A.出具虚假仓单 B.违反期货交易所
建设项目电气设备容量小,施工周期时间短,可采取就近借用电源的方法,解决施工现场的
能引起人畜共患病的病原体是A.梅毒螺旋体 B.霍乱弧菌 C.布氏杆菌 D.
最新回复
(
0
)