首页
登录
职称英语
There are a number of methods of joining metal articles together, depending
There are a number of methods of joining metal articles together, depending
游客
2024-10-10
30
管理
问题
There are a number of methods of joining metal articles together, depending on the type of metal and the strength of the joint which is required. Soldering gives a satisfactory joint for light articles of steel, copper or brass, but the strength of a soldered joint is rather less than a joint which is brazed, riveted or welded. These methods of joining metal are normally adopted for strong permanent joints.
The simplest method of welding two pieces of metal together is known as pressure welding. The ends of metal are heated to a white heat—for iron, the welding temperature should be about 1 , 300℃—in a flame. At this temperature the metal becomes plastic. The ends are then pressed or hammered together, and the joint is smoothed off. Care must be taken to ensure that the surfaces are thoroughly clean first, for dirt will weaken the weld. Moreover, the heating of iron or steel to a high temperature causes oxidation, and a film of oxide is formed on the heated surfaces. For this reason, a flux is applied to the heated metal. At welding heat, the flux melts, and the oxide particles are dissolved in it together with any other impurities which may be present. The metal surfaces are pressed together, and the flux is squeezed out from the centre of the weld. A number of different types of weld may be used, but for fairly thick bars of metal, a vee-shaped weld should be employed. It is rather stronger than the ordinary butt weld.
The heat for fusion welding is generated in several ways, depending on the sort of metal which is being welded and on its shape. An extremely hot flame can be produced from an oxyacetylene torch. For certain welds an electric arc is used. In this method, an electric current is passed across two electrodes, and the metal surfaces are places between them. The electrodes are sometimes made of carbon, but more frequently they are metallic. The work itself constitutes one of them and the other is an insulated filler rod. An arc is struck between the two, and the heat which is generated melts the metal at. the weld. A different method is usually employed for welding sheets or plates of metal together. This is known as spot welding. Two sheets or plates are placed together with a slight overlap, and a current is passed between the electrodes. At welding temperature, a strong pressure is applied to the metal sheets. The oxide film, and any impurities which are trapped between the sheets, are squeezed out, and the weld is made. [br] What is the best title for the passage?
选项
A、Welding
B、Soldering
C、Fusion Welding
D、Pressure Welding
答案
A
解析
主旨题。本文主要介绍了焊接(welding)的四种方式:pressure welding,fu—sion welding,spot welding,gas welding,故[A]是正确答案。
转载请注明原文地址:https://tihaiku.com/zcyy/3794692.html
相关试题推荐
Thereareanumberofmethodsofjoiningmetalarticlestogether,depending
Thereareanumberofmethodsofjoiningmetalarticlestogether,depending
Thereareanumberofmethodsofjoiningmetalarticlestogether,depending
I’vewrittenbeforeaboutSherryTurkle’snewbook,AloneTogether:WhyWeE
I’vewrittenbeforeaboutSherryTurkle’snewbook,AloneTogether:WhyWeE
I’vewrittenbeforeaboutSherryTurkle’snewbook,AloneTogether:WhyWeE
Atthepartywefoundthatshygirl______hermotherallthetime.A、dependingo
Whousedtolivetogetherinanextendedfamily?[br][originaltext]Thefa
Whousedtolivetogetherinanextendedfamily?[br][originaltext]Thefa
______ismentionedabove,thenumberofthestudentsinseniorhighschoolsisi
随机试题
【B1】______[br]【B4】______[originaltext]Howmenfirstlearnttoinventwor
同步通信之所以比异步通信具有较高的传输速率,是因为()。A.同步通信不需要应答
关于第四脑室的描述正确的是A、经正中孔和外侧孔与小脑延髓池相通 B、位于脑桥小
胃癌的主要转移途径是A.肺转移 B.骨转移 C.腹腔种植转移 D.肝转移
小麦在课堂上难以集中注意力,是老师眼中“坐不住的孩子”。有时他会在课堂上“骚扰”
A.伤寒 B.乙脑 C.流脑 D.流感 E.人禽流感上述各传染病,属病毒
A.形寒肢冷B.呼多吸少C.五心烦热D.小儿骨骼痿软E.胎动易滑肾气不固的临床表
在大型零售商业物业经营管理中,通常采取“门里门外”的管理组织形式开展现场管理,这
动机与工作效率之间的关系遵循耶克斯—多德森定律,也就是说( )A.动机与工作效
门脉性肝硬化的特点是 A.结节大小不等,纤维间隔厚薄不均 B.结节大小相仿,
最新回复
(
0
)