首页
登录
职称英语
New-Age Transport It looks as if it came straig
New-Age Transport It looks as if it came straig
游客
2025-02-09
28
管理
问题
New-Age Transport
It looks as if it came straight from the set of Star Wars. It has four-wheel drive and rises above rocky surfaces. It lowers and raises its nose when going up and down hills. And when it comes to a river, it turns amphibious: two hydrojets power it along by blasting water under its body. There is room for two passengers and a driver, who sit inside a glass bubble operating electronic, aircraft-type controls. A vehicle so daring on land and water needs windscreen wipers — but it doesn’t have any. Water molecules are disintegrated on the screen’s surface by ultrasonic sensors.
This unusual vehicle is the Racoon. It is an invention not of Hollywood but of Renault, a rather conservative French state-owned carmaker, better known for its family hatchbacks. Renault built the Racoon to explore new freedoms for designers and engineers created by advances in materials and manufacturing processes. Renault is thinking about startlingly different cars; other producers have radical new ideas for trains, boats and aeroplanes.
The first of the new freedoms is in design. Powerful computer-aided design (CAD) systems can replace with a click of a computer mouse hours of laborious work done on thousands of drawing boards. So new products, no matter how complicated, can be developed much faster. For the first time, Boeing will not have to build a giant replica of its new airliner, the 777, to make sure all the bits fit together. Its CAD system will take care of that.
But Renault is taking CAD further. It claims the Racoon is the world’s first vehicle to be designed within the digitised world of virtual reality. Complex programs were used to simulate the vehicle and the terrain that it was expected to cross. This allowed a team led by Patrick Le Quement, Renault’s industrial-design director, to "drive" it long before a prototype existed.
Renault is not alone in thinking that virtual reality will transform automotive design. In Detroit, Ford is also investigating its potential. Jack Telnac, the firm’s head of design, would like designers in different parts of the world to work more closely together, linked by computers. They would do more than style cars. Virtual reality will allow engineers to peer inside the working part of a vehicle. Designers will watch bearings move, oil flow, gears mesh and hydraulics pump. As these techniques catch on, even stranger vehicles are likely to come along.
Transforming these creations from virtual reality to actual reality will also become easier, especially with advances in materials. Firms that once bashed everything out of steel now find that new alloys or composite materials (which can be made from mixtures of plastic, resin, ceramics and metals, reinforced with fibres such as glass or carbon) are changing the rules of manufacturing. At the same time, old materials keep getting better, as their producers try to secure their place in the factory of the future.A This competition is increasing the pace of development of all materials.
B One company in this field is Scaled Composites.C It was started in 1982 by Burt Rutan, an aviator who has devised many unusual aircraft.D It has also worked on composite sails for the America’s Cup yacht race and on General Motors’ Ultralite, a 100-milesper-gallon experimental family car built from carbon fibre.
Again, the Racoon reflects this race between the old and the new. It uses conventional steel and what Renault describes as a new "high-limit elastic steel" in its chassis. This steel is 30% lighter than the usual kind. The Racoon also has parts made from composites. Renault plans to replace the petrol engine with a small gas turbine, which could be made from heat-resisting ceramics, and use it to run a generator that would provide power for electric motors at each wheel.
With composites it is possible to build many different parts into a single component. Fiat, Italy’s biggest car maker, has worked out that it could reduce the number of components needed in one of its car bodies from 150 to 16 by using a composite shell rather than one made of steel. Aircraft and cars may increasingly be assembled as if they were plastic kits.
Advances in engine technology also make cars lighter. The Ultralite, which Scaled Composites helped to design for General Motors, uses a two-stroke engine in a "power pod" at the rear of the vehicle. The engine has been developed from an East German design and weighs 40% less than a conventional engine but produces as much power. It is expected to run cleanly enough to qualify as an ultra-low emissions vehicle under California’s tough new rules. [br] The word style in paragraph 5 is closest in meaning to
选项
A、fashionable.
B、attractive.
C、typical.
D、colorful.
答案
A
解析
转载请注明原文地址:http://tihaiku.com/zcyy/3948921.html
相关试题推荐
New-AgeTransportItlooksasifitcamestraig
New-AgeTransportItlooksasifitcamestraig
New-AgeTransportItlooksasifitcamestraig
New-AgeTransportItlooksasifitcamestraig
New-AgeTransportItlooksasifitcamestraig
New-AgeTransportItlooksasifitcamestraig
New-AgeTransportItlooksasifitcamestraig
THETRANSPORTATIONREVOLUTION1Bythecloseoftheeighteent
THETRANSPORTATIONREVOLUTION1Bythecloseoftheeighteent
THETRANSPORTATIONREVOLUTION1Bythecloseoftheeighteent
随机试题
SheaskedmewhenI______Beijing.A、arrivedB、arrivedtoC、reachedD、reachedto
Questions9-15•Lookatthenotesbelow.•Someinformationismissing
Inthefirstparagraph,whatdidtheauthortrytotellus?[br]Ifa24-year-ol
阅读孟子《寡人之于国也》中的一段文字。 不违农时,谷不可胜食也;数罟不入海池,
下列部件中,不属于普通X线成像设备组成部分的是A.X线管及支架 B.变压器
子宫肉瘤转移至肝脏实质,FIGO临床分期为A.Ⅰ期 B.0期 C.Ⅲ期 D
某版本生物教材中设计了诸多探究实践活动供师生选择,其符合《普通高中生物学课程标准
在下列片剂辅料中,可作片剂黏合剂的是A.硬脂酸镁 B.微粉硅胶 C.交联聚乙
《变电评价管理规定第29分册变电站运维管理评价细则》:编制生产准备工作方案:二类
女,38岁。2周前突发颈前部疼痛,右侧尤甚,吞咽时疼痛加重,伴有午后低热,4周前
最新回复
(
0
)