首页
登录
职称英语
How many are there quality control inspection points? [br] What is the first sta
How many are there quality control inspection points? [br] What is the first sta
游客
2025-05-16
20
管理
问题
How many are there quality control inspection points? [br] What is the first stage of quality control?
V: Could you tell me a bit about quality control at the factory?
P: Well, there are four main quality control inspection points. We begin by visiting our suppliers to make sure we are happy with their quality control. Next, we inspect all goods in on arrival at our factory and the third inspection point is during production. And the final stage is chemical analysis of our finished goods.
V: And what do you look for at each of the four inspection points?
P: Well each stage is different. With our suppliers, for instance, we inspect their QC processes and, even more importantly, their factory hygiene. If we’re not happy with their hygiene, we’ll cancel the supply contract. At the goods in stage we make sure that order quantities are correct and the quality is OK. We also check the transport packaging. If the packaging is dam aged, the warehouse shelf-life can be reduced. V: And what quality checks do you run during pro duction?
P: We take samples to check there isn’t too much cooking oil on the snack and that each snack has the minimum amount of flavouring. We also check the size of the snacks and their crisp ness. If the snacks are too oily, they go soft.
V: So that leaves the finished goods. What do you check for at the final QC stage?
P: We check individual bags to make sure that the packet weight is above the acceptable minimum and that the packet is sealed properly. We also check the taste.
V: And how do you do that?
P: Well, we eat them. How else? We also do chemical analysis to check things like fat levels and other information that we have to put on the packets.
选项
A、visiting our suppliers
B、during production
C、chemical analysis
答案
A
解析
关键句:"We begin by visiting our suppliers to...".
转载请注明原文地址:https://tihaiku.com/zcyy/4078838.html
相关试题推荐
Howmanyaretherequalitycontrolinspectionpoints?[br]Howtocheckthequal
Howmanyaretherequalitycontrolinspectionpoints?[br]Atgoodsstage,wema
Howmanyaretherequalitycontrolinspectionpoints?[br]Whatisthefinalsta
Howmanyaretherequalitycontrolinspectionpoints?[br]Whatisthefirststa
Howmanyaretherequalitycontrolinspectionpoints?[br]Atgoodsstage,wema
Howmanyaretherequalitycontrolinspectionpoints?[br]Atfirstinspections
Howmanyaretherequalitycontrolinspectionpoints?[br]Whatisthefinalsta
Howmanyaretherequalitycontrolinspectionpoints?[br]Whatisthefirststa
Youwillhearaconversationaboutqualitycontrol.Foreachquestion23--30,ma
Howmanyaretherequalitycontrolinspectionpoints?[br][originaltext]PartF
随机试题
I______toseeyoubutIwasoccupiedindesigninganewdevice.A、wouldhavecome
Somepeopleassociatemigrationmainlywithbirds.Birdsdotravelvastdist
A.四肢短,手指粗而短,小指尤短且向内弯曲,无粘液性水肿,皮肤毛发正常 B.全
Thechangeinthatvillagewasmiraculou
A.喷雾干燥法 B.天然高分子凝聚法 C.相分离法 D.热熔法 E.溶剂
在6~10kV中性点不接地系统中,发生接地时,非故障相的相电压将(C)。(A)不
各种运输方式内外部的各个方面的构成和联系,就是( )。 A.运输系统
简答传统组织的设计原则。
2020年中国医药研发外包市场中,临床试验医药研发外包的比重约比2011
某路基压实施工时,产生“弹簧”现象,宜采用的处理措施是()。A.增大压实机具功
最新回复
(
0
)