首页
登录
职称英语
How many are there quality control inspection points? [br] [originaltext]Part F
How many are there quality control inspection points? [br] [originaltext]Part F
游客
2025-05-16
23
管理
问题
How many are there quality control inspection points? [br]
Part Four. Questions 23 to 30.
You will hear a conversation about quality control.
For each question 23-30 , mark one letter (A, B or C) for the correct answer.
After you have listened once , replay the recording.
You now have 45 seconds to read through the questions.
[pause]
Now listen , mark A , B, or C.
M: Could you tell me a bit about quality control at the factory?
W: Well, there are four main quality control inspection points. We begin by visiting our suppliers to make sure we are happy with their quality control. Next, we inspect all goods on arrival at our factory and the third inspection point is during production. And the last stage is chemical analysis of our finished goods.
M: And what do you look for at each of the four inspection points?
W: Well each stage is different. With our suppliers, for instance, we inspect their quality control processes and, even more importantly, their factory hygiene. If we’re not happy with their hygiene, we’ll cancel the supply contract. As the goods is in stage, we make sure that order quantities are correct and the quality is OK. We also check the transport packaging. If the packing is damaged, the warehouse shelf-life can be reduced.
M: And what quality checks do you run during production?
W: We take samples to check there isn’t too much cooking oil on the snack and that each snack has the minimum amount of flavouring. We also check the size of the snacks and their crispness. If the snacks are too oily, they go soft.
M: So that leaves the finished goods. What do you check for at the final quality control stage?
W: We check individual bags to make sure that the packet weight is above the acceptable minimum and that the packet is sealed properly. We also check the taste.
M: And how do you do that?
W: Well, we eat them. How else? We also do chemical analysis to check things like fat levels and other information that we have to put on the packets.
[pause]
Now listen to the recording again.
[pause]
That is the end of Part Four. You now have ten minutes to transfer your answers to your Answer Sheet.
[pause]
选项
A、Check every one.
B、Take samples to check it.
C、Check it at random.
答案
B
解析
题干意为:在生产过程中怎样检查质量。原文信息:We take samples to check。故选B。
转载请注明原文地址:http://tihaiku.com/zcyy/4078362.html
相关试题推荐
Howmanyaretherequalitycontrolinspectionpoints?[br][originaltext]PartF
Whatistheman’stitle?[br][originaltext]PartOne.Questions1to8.Forque
Whatistheman’stitle?[br][originaltext]PartOne.Questions1to8.Forque
Whatistheman’stitle?[br][originaltext]PartOne.Questions1to8.Forque
Whatistheman’stitle?[br][originaltext]PartOne.Questions1to8.Forque
Whatistheman’stitle?[br][originaltext]PartOne.Questions1to8.Forque
Themeetingisbeingheldtodiscuss______.[br][originaltext]NFC=NationalF
Themeetingisbeingheldtodiscuss______.[br][originaltext]NFC=NationalF
Themeetingisbeingheldtodiscuss______.[br][originaltext]NFC=NationalF
Themeetingisbeingheldtodiscuss______.[br][originaltext]NFC=NationalF
随机试题
Inbusiness,ifnotpolitics,theworldhasquieteneddownabit:thenumbero
Biogas:aSolutiontoManyProblemsInalmostalldevelopin
Ourshasbecomeasocietyofemployees.Ahundredyearsorsoagoonlyoneo
[originaltext]Whenyougotoacollegeorhighschoolsportsevent,youcan
选择器官移植受者的首位标准是()A.移植的禁忌证与适应证 B.受者在家
绝热材料的导热系数与含水率的正确关系是: A.含水率越大,导热系数越小B.导
已知甲公司的可比上市公司经调整后有财务杠杆的β系数为1.1,资产负债率为0.35
哪项不是黄花蒿的性状鉴别特征A:茎方形,上部多分枝 B:表面黄绿色或黄棕色,
《药品生产质量管理规范》用下列哪个表示A.GVP B.GLP C.GCP
德育过程中经常出现“屡教不改”的现象,这说明() A.德育过程是对学生知
最新回复
(
0
)